Dannmar DJ-6000

6,000-lbs. Capacity Rolling Bridge Jack
In stock
SKU 5175325
$1,903.00
Dannmar’s DJ-6000 was built to last. This rolling bridge jack is tough enough to easily handle up to three tons worth of weight. The DJ-6000 has been specifically designed for use with Dannmar’s four-post lift with standard runways and 12,000 lb. lifting capacity. This rolling bridge jack will deliver you the versatility and additional access to raise the wheels off the runways of the vehicle lift.

Overview

The DJ-6000 by Dannmar is a great option if you’re thinking of turning your lift into a full-service car lift. It’s convenient to have, simple to use, and completely safe. This Rolling Bridge jack has a lifting capacity of 6,000 lbs. so you can repair an even wider variety of vehicles. Once the jack is under the appropriate front or rear chassis of the vehicle, you will be able to lift the vehicle up and off the runways. Each four-post rolling bridge jack can be raised to three different heights. As the jack scissor arms raise, locks engage automatically. They will release simultaneously as the arms are lowered. The side of the rolling bridge jack has a high-pressure, air-hydraulic pump welded to it. To activate it all you need to do is use the foot pedal which is attached to the unit.

Features

  • 6,000-lb. lifting capacity
  • Rubber contact pads
  • Stackable adapters to maximize arm reach
  • High-pressure commercial air-hydraulic power unit; foot operated
  • Optional air-line kit

Specs

SKU# 5175326
Lifting Capacity 6,000 lbs. (2,722 kg)
Max. Height + Pad Only 16.5” (419 mm)
Max. Height + Pad + Adapter 20” (508 mm)
Min. Height + Pad Only 6.5” (165 mm)
Min. Height + Pad + Adapter 10” (254 mm)
Support Arm Width 35” (889 mm) - 45.5” (1,156 mm)
Max. Arm Reach 56” (1,422 mm)
Min. Arm Reach 42” (1,067 mm)
Motor Air-Hydraulic Pump
Shipping Weight 338 lbs. (153 kgs)
Shipping Dimensions 24" x 42" x 14" (609 mm x 1,066 mm x 355 mm)
Noise 45 dB
Lifting Time 45 seconds

WARNING: California's Proposition 65