Autostacker Access Panel

Removable Access Panel / AutoStacker
In stock
Only %1 left
SKU Access Panel
As low as $950.00

Autostacker’s access panel will replace two portions of the galvanized decking on the Autostacker, permitting undercarriage access that won’t interfere with the vehicle loading/unloading. Two panels will turn Autostacker into a fully open-center maintenance lift.

Overview

Autostacker is a world-class parking lift that includes a deck with bolt-on, interlocking galvanized deck panels. With Autostacker’s access panel you will now be able to perform vehicle maintenance with your lift. With this removable, stainless-steel center-access panel, you’ll be able to replace two galvanized deck panels per access panel. This optional accessory can be adjusted anywhere under the vehicle, so you’ll be able to perform oil changes easily on just about every make and model. By having multiple access panels (up to 2), you can replace parts of the galvanized deck at the fore and aft locations to permit complete access to your vehicle’s undercarriage, which in turn has your parking lift transform into a full-fledged maintenance lift. With the center panel removed, vehicles will still be able to drive on and off the lift.

Autostacker is first and foremost a parking tool, yet with the access panel at your disposal you can turn your Autostacker into a specialized four-post lift. You’ll have a higher rise than most column-structure lifts, all while taking up significantly less space in your garage. If you don’t plan on doing any serious maintenance and really just want to do oil changes, you’ll only need a single panel. With two access panels you could combine incredible parking power with full-service capability. After you have completed performing maintenance, simply place the stainless-steel platforms back over the access port to prevent any fluids from dripping on the lower-parked vehicle.

Removeable access panel for Autostacker

Features

  • Lightweight aluminum diamond plate removable cover
  • Extends the width of the platform to protect vehicles underneath
  • Solid-steel construction reinforces platform stability
  • Non-abrasive powder-coat finish
  • Sold as one assembly, maximum two assemblies per Autostacker unit

Specs

Dimensions

Overall Assembly Width For A6S – 83.25” (2,114mm) For A6W – 91.25” (2,317mm)
Overall Assembly Width 35" (890mm)
Aluminum Cover Width 53.25" (1,350mm)
Aluminum Cover Length 35" (890mm)

WARNING: California's Proposition 65