HDSO14AX + RJ7W + Airline Kit

HDSO14AX

BendPak’s HDSO14AX is a high-quality open-front alignment lift which can easily handle 14,000 lbs. With its intuitive “open” design, it’s easier than ever to access the front turn plates as well as the undercarriage. This alignment lift is equipped with front turn plates and rear slip plates which are built directly into the runways. When using this lift, wheels will respond to any adjustment with no resistance.

The HDSO14X comes with rear-facing multi-caster slip plates and front-facing plates which allow for precise, free-floating alignment. It includes top-of-the-line turnplates which feature an aluminum-alloy construction which can easily be positioned using BendPak’s turn plate pockets. These plates are larger and more robust than previous designs, these turnplates are lighter in construction and feature dual “popsicle gap stops” for added convenience. The angled steel lock pins will hold the plate in place if you find yourself wanting to use your lift strictly for maintenance or storage purposes.

When going with a BendPak lift you will find that their lift includes strong, durable, and oversized 10.5” diameter cable sheaves within the runway and cross tubes, as well as 2.25” diameter sheave axles. With these high-quality components your car lift will be running efficiently for a good long time.

Four aircraft quality steel cables run within the columns. They are legitimately the ultimate standard for high-quality cable construction and safe lifting.

This lift features multiple locking heights which will allow your mechanics of varying heights to be able to work comfortably. Thanks to the open-front design, anyone will be able to go underneath, no matter their height.

The HDSO14AX features spring-loaded safety locks will engage as the lock ascends into position. This intuitive design will work to keep the platforms even, even if there is a tiny slope to your garage flooring.

The air locks make the locks release at the same time every time. The instant release ensures that the alignment lift platforms will descend evenly every time.

Thinking of everything, a backup lock system was built in the event that cable slack is detected. If this were to occur, the cable would be immediately “grabbed”, and the entire operation would cease immediately.

It is easier to load low ground-clearance vehicles, due to the long approach ramps. It’s so easy in fact that you will never scratch up the bottom of your car or struggle with the gas pedal to give enough gas, assuming you aren’t shooting onto the ramp at an unsafe speed.

The high-duty conduit that surrounds the airlines and hydraulic hoses keeps damage from occurring to the cables. It also protects you from getting shocked.

RJ7W

The RJ7W is a 7,000 lb. capacity rolling bridge jack which was made for the HDS-14 series four-post lift. Every rolling jack comes complete with three safety-lock positions and stackable pad adapters to provide added clearance when needed.

The RJ7W rolling bridge comes equipped with easy-roll wheels that fit onto the runway channels on standard four-post lift models with 14,000 lbs. or greater lifting capacity. With it, you’ll be able to receive an effortless gliding along the runways for easy positioning and adjustability. BendPak has designed their rolling bridge jack rollers with hardened stainless-steel and had them zinc plated for maximum durability.

Suspension rigs and vehicle bodies sit at different heights above the ground, which means the RJ7W will need rubber contact pads with stackable adapters. Now you’ll be able to reach the lift points without sacrificing how much rise you’ll be able to get out of the jack. The adapters work on virtually every vehicle type; all you need to know is whether the RJ7W is the right jack for you.

You want to have your operators work in comfort, and that’s why BendPak has designed the RJ7W to have multiple lock levels. The rolling bridge jacks can be lifted to three different positions, and locks automatically as the jack rises and release together as the jack descends. The car lift operations are separate from those of the bridge jack.

Airline Kit

BendPak’s Airline Kit comes with adapter fittings that will allow you to connect airlines to your rolling bridge jack air/hydraulic pumps. Once the fittings are installed, you’ll only need one hose to provide air for both of your rolling bridge jacks.

This airline kit comes complete with adapter fittings that will allow you to connect airlines to your rolling bridge jack air/hydraulic pumps. With the fittings installed, all you’ll need is one hose to deliver air for both of your rolling bridge jacks. Not only does this end up simplifying the process, but the fittings in the airline kit will also let you hide the airline up and away, mounting the airlines securely to the bottom of your lift’s runways.

Messy airlines do two things: they look awful, and they’re a huge tripping hazard. With this kit you’ll have peace of mind while you work, and it comes with everything that you’ll need to give your four-post lift, as well as your shop, a clean and efficient setup.