Tire-Saver Ramps
Tire-Saver Ramps
Help protect stored vehicles from flat spotting with APEX tire-saver ramps designed to support the tire's natural shape instead of leaving it parked directly on a flat concrete surface.
Lightweight structural foam construction, a contoured tire cradle and a textured surface make these ramps a practical storage solution for classics, performance cars and other vehicles that may sit for extended periods.
Protection
A better surface for tires at rest.
The current APEX Tire-Saver Ramp Kit combines four contoured structural foam ramps into one vehicle storage setup. Each ramp supports one tire while the vehicle is parked.
The curved contact surface supports the tire's natural shape and spreads the load across the tread while the vehicle is stored.
Keeping the tires supported on a contoured surface can help reduce flat spotting that may develop while a vehicle remains parked for extended periods.
Lightweight structural foam construction makes the individual ramps easier to position, move and store when they are not underneath the vehicle.
Four-ramp kit with a 1.5-inch lift and 9-degree approach angle, providing one tire-saver ramp for each wheel.
View Tire-Saver KitRamps
Tire-Saver Ramps for Vehicle Storage
Shop the APEX lightweight foam Tire-Saver Ramp Kit for classics, performance cars, collector vehicles and other vehicles that spend extended periods in storage.
APEX tire-saver ramps keep stored cars ready to roll. A wide, contoured cradle supports the tire’s natural shape instead of cold concrete, helping prevent flat spots. Lightweight, grippy, and garage-friendly protection for classics and performance cars. Get yours today, here at Wrenchers.
Shop Tire-Saver Ramps
Lightweight Foam Tire-Saver Ramp Kit (Set of 4)
Tire Savers?
Give stored tires a contoured surface.
Leaving a vehicle parked in one position for weeks or months keeps the same section of each tire under load. Tire-saver ramps replace the flat garage floor beneath the tire with a curved cradle designed to support its natural shape.
A contoured cradle supports the tire's natural shape while the vehicle remains parked.
The curved contact surface spreads the load instead of leaving the tire resting against one flat surface.
Structural foam construction keeps the ramps lightweight enough to position and move around the garage.
The current APEX Tire-Saver Ramp Kit includes four ramps, providing one contoured support for each tire.
APEX AR-2437-9-TS
Lightweight foam Tire-Saver Ramp Kit designed as a four-wheel vehicle storage setup.
Applications
Built for vehicles that spend time parked.
Tire-saver ramps are particularly useful when a vehicle may remain in the same position for weeks or months at a time.
Ramp FAQs
Tire-Saver Ramp FAQs
Common questions about using tire-saver ramps for vehicle storage.
01 What do tire saver ramps do?
Tire saver ramps support the tire's natural shape while a vehicle sits in storage. By lifting the tire off cold, flat concrete and spreading the load, they help reduce flat spotting and sidewall stress over time.
02 Are tire saver ramps better than parking on concrete?
Yes. Concrete pulls heat and moisture from the tire, which can contribute to flat spots during long storage. Tire saver ramps create a curved contact surface that keeps pressure distributed more evenly across the tread.
03 What vehicles benefit most from tire saver ramps?
They are ideal for performance cars, classics, collector vehicles, and anything that sits for weeks or months at a time. Low-profile tires and high-performance compounds benefit the most from proper support during storage.
04 Are APEX tire saver ramps easy to move and store?
Yes. The structural foam construction keeps them lightweight, so you can position them quickly without straining your back. When not in use, they are easy to stack or tuck against a wall.
05 Will tire saver ramps damage my garage floor or tires?
No. The textured coating grips the floor to prevent sliding while remaining gentle on finished surfaces. The contoured cradle supports the tire evenly, avoiding pressure points that can harm tread or sidewalls.
Get advice on tire-saver ramps.
Our product specialists can answer your questions and help you through the buying process.
We're here Mon-Fri, 7am to 6:30pm CTTire-Saver Ramp FAQs
What do tire saver ramps do?
Tire saver ramps support the tire’s natural shape while a vehicle sits in storage. By lifting the tire off cold, flat concrete and spreading the load, they help reduce flat spotting and sidewall stress over time.
Are tire saver ramps better than parking on concrete?
Yes. Concrete pulls heat and moisture from the tire, which can contribute to flat spots during long storage. Tire saver ramps create a curved contact surface that keeps pressure distributed more evenly across the tread.
What vehicles benefit most from tire saver ramps?
They are ideal for performance cars, classics, collector vehicles, and anything that sits for weeks or months at a time. Low-profile tires and high-performance compounds benefit the most from proper support during storage.
Are APEX tire saver ramps easy to move and store?
Yes. The structural foam construction keeps them lightweight, so you can position them quickly without straining your back. When not in use, they are easy to stack or tuck against a wall.
Will tire saver ramps damage my garage floor or tires?
No. The textured coating grips the floor to prevent sliding while remaining gentle on finished surfaces. The contoured cradle supports the tire evenly, avoiding pressure points that can harm tread or sidewalls.
Shop Tire-Save Ramps at Wrenchers
Get advice on tire-saver ramps
We have product specialists with years of experience ready to answer your questions and help you through the buying process.
We're here Mon-Fri, 7am to 6:30pm CT