Mobile column lifts give your shop the power to lift trucks, buses and heavy fleet equipment, then move from bay to bay as the job changes. Wrenchers carries BendPak and MAHLE systems with total lifting capacities from 36,000 to 144,000 lbs.
Mobile column lifts are sold in configurations that let you match the number of lifting columns to the vehicle. Compare total capacity, number of columns and communication type before choosing a system for your fleet or service operation.
Two BendPak PCL-18B columns provide 18,000 lbs. of capacity per column and 36,000 lbs. of total lifting capacity.
Four-column configurations cover common two-axle commercial vehicles, with BendPak and MAHLE systems available.
Six PCL-18B columns expand the system for larger three-axle vehicles while maintaining 18,000 lbs. of lifting capacity per column.
The eight-column PCL-18B configuration provides maximum capacity for large four-axle vehicles and demanding heavy-fleet applications.
Get serious lifting power with mobile column lift systems sold in sets of two, four, six or eight. Compare BendPak and MAHLE systems for trucks, buses and commercial fleet vehicles, with configurations reaching up to 144,000 lbs. of total lifting capacity.
Mobile column lifts give your shop the power to lift trucks, buses, and heavy fleet equipment, then move from bay to bay as the job changes. Wrenchers carries BendPak and Mahle sets that lift 36,000 to 144,000 lbs.
Get serious lifting power with these column lifts, equipped with best-in-class safety features and sold in sets of two, four, six, or eight. They can handle everything from 56,000 lbs. all the way up to an incredible 144,000 lbs., so there’s virtually no job they can’t tackle. Even better, you don’t have to use all your lifts at once: Split them into smaller sets to fit the specific needs of each job and maximize your shop’s flexibility.
Compare total lifting capacity, number of columns, capacity per column, lifting height, speed, power requirements and communication type across the current BendPak and MAHLE mobile column lift systems.
| Model |
BendPak PCL-18B Set of 2 |
BendPak PCL-18B Set of 4 |
BendPak PCL-18B Set of 6 |
BendPak PCL-18B Set of 8 |
MAHLE CML-7X4 Set of 4 |
MAHLE CML-9X4 Set of 4 |
|---|---|---|---|---|---|---|
| Lifting Capacity | 36,000 lbs. | 72,000 lbs. | 108,000 lbs. | 144,000 lbs. | 56,000 lbs. | 72,000 lbs. |
| Number of Columns | 2 | 4 | 6 | 8 | 4 | 4 |
| Capacity / Column | 18,000 lbs. | 18,000 lbs. | 18,000 lbs. | 18,000 lbs. | 14,000 lbs. | 18,000 lbs. |
| Lifting Height | 69 in. | 69 in. | 69 in. | 69 in. | 70 in. | 70 in. |
| Lifting Speed | 78 sec. | 78 sec. | 78 sec. | 78 sec. | 75 sec. | 75 sec. |
| Power Requirements | 220V / 30A | 220V / 30A | 220V / 30A | 220V / 30A | 208–230V / 30A | 208–230V / 30A |
| Communication Type | Wireless | Wireless | Wireless | Wireless | Cable-Connected | Cable-Connected |
Use the individual product pages for complete specifications and installation requirements.
The BendPak PCL-18B is a portable, surface-mounted column lift built for heavy-duty fleet service. It needs no site prep and no permanent installation, and it lifts vehicles up to 144,000 lbs. with unlimited lift cycles. It runs on three-phase power and works indoors or in covered outdoor spaces. Take a closer look at how the PCL-18B performs, moves and holds up in a working shop.
The PCL-18B lifts massive vehicles quickly, so technicians spend less time waiting and more time working. Its on-demand electric-hydraulic power system runs only when the lift is in motion, which keeps energy use down and work cycles long. The system also supports unlimited lift cycles, so you can raise and lower vehicles all day with no forced cooldowns or duty-cycle limits.
A built-in hydraulic jack raises each column off the floor in just three strokes of the handle, so a single technician can reposition the lift without help. The 180-degree handle uses the same controls as a pallet jack, which makes it easy to steer columns into place even in a tight shop. Tandem 8-inch polyurethane-covered steel wheels with sealed roller bearings carry the column over dirt and debris without snagging. Once a column is set, the wheels lower it firmly onto the floor for a stable, planted base.
Every column has an emergency shut-off switch, so an operator who spots a problem can cut power to the lift right away. Automatic safety locks engage every four inches as the columns rise, holding the vehicle securely at any working height. Inverted hydraulic cylinders use an integrated safety valve that prevents the lift from dropping if it loses oil pressure, and a manual override valve lets you lower the columns safely during a power outage. The PCL-18B also meets the ANSI/ALI ALCTV standard.
Low-pressure HVLP direct-drive cylinders do away with lifting chains and screw-drive systems that wear out and need regular service. Their inverted design keeps piston rods shielded from dirt and debris, which extends the life of the hydraulics and cuts down on maintenance. Each column carries its own self-contained electric-hydraulic power unit, and BendPak finishes every column in durable powder coat for daily shop use.
Understand how mobile column lifts work, how many columns different vehicles require and the differences between wired and wireless systems.
A mobile column lift, also known as a portable column lift , is a set of free-standing columns that surround a vehicle and raise it evenly off the ground. Each column rolls into position on its own wheels, so there is no permanent installation and no fixed footprint the way there is with a two-post lift or four-post lift . This makes column lifts a standard choice for heavy-duty trucks, buses and fleet vehicles that are too large or too heavy for a fixed lift.
The number of columns depends on how many axles the vehicle has, since each axle needs a column on both sides. A two-axle truck takes a set of 4, a three-axle vehicle takes a set of 6, and a four-axle vehicle takes a set of 8. If you service a mix of vehicles, a larger set gives you the most flexibility, because you can split it into smaller groups and lift more than one truck at a time.
Wired column lifts connect to each other with control cables that run between the columns, while wireless lifts communicate with no cables at all. Wireless systems leave the floor and the undercarriage completely clear, which gives technicians cleaner access and removes cables as a trip hazard. Wired systems work just as reliably and are often the more affordable option, so the right choice comes down to your budget and how much open floor space your shop needs.
We have product specialists with years of experience ready to answer your questions and help you through the buying process. Tell us about your fleet, vehicle weights and axle configurations and we'll help you narrow down the right mobile column lift system.
| Model | BendPak PCL-18B | Set of 2 | BendPak PCL-18B | Set of 4 | BendPak PCL-18B | Set of 6 | BendPak PCL-18B | Set of 8 | Mahle CML-7X4 | Set of 4 | Mahle CML-9X4 | Set of 4 |
|---|---|---|---|---|---|---|
| Lifting Capacity (lbs) | 36,000 | 72,000 | 108,000 | 144,000 | 56,000 | 72,000 |
| # of Columns | 2 | 4 | 6 | 8 | 4 | 4 |
| Lifting Capacity / Column (lbs) | 18,000 | 18,000 | 18,000 | 18,000 | 14,000 | 18,000 |
| Lifting Height (in) | 69 | 69 | 69 | 69 | 70 | 70 |
| Lifting Speed (sec) | 78 | 78 | 78 | 78 | 75 | 75 |
| Power Requirements | 220V / 30A | 220V / 30A | 220V / 30A | 220V / 30A | 208–230V / 30A | 208–230V / 30A |
| Communication Type | Wireless | Wireless | Wireless | Wireless | Cable-Connected | Cable-Connected |
The BendPak PCL-18B is a portable, surface-mounted column lift built for heavy-duty fleet service. It needs no site prep and no permanent installation, and it lifts vehicles up to 144,000 lbs. with unlimited lift cycles. It runs on three-phase power and works indoors or in covered outdoor spaces.
Take a closer look at how the PCL-18B performs, moves, and holds up in a working shop:
The PCL-18B lifts massive vehicles quickly, so technicians spend less time waiting and more time working. Its on-demand electric-hydraulic power system runs only when the lift is in motion, which keeps energy use down and work cycles long. The system also supports unlimited lift cycles, so you can raise and lower vehicles all day with no forced cooldowns or duty-cycle limits.
A built-in hydraulic jack raises each column off the floor in just three strokes of the handle, so a single technician can reposition the lift without help. The 180-degree handle uses the same controls as a pallet jack, which makes it easy to steer columns into place even in a tight shop. Tandem 8-inch polyurethane-covered steel wheels with sealed roller bearings carry the column over dirt and debris without snagging. Once a column is set, the wheels lower it firmly onto the floor for a stable, planted base.
Every column has an emergency shut-off switch, so an operator who spots a problem can cut power to the lift right away. Automatic safety locks engage every four inches as the columns rise, holding the vehicle securely at any working height. Inverted hydraulic cylinders use an integrated safety valve that prevents the lift from dropping if it loses oil pressure, and a manual override valve lets you lower the columns safely during a power outage. The PCL-18B also meets the ANSI/ALI ALCTV standard, the independent certification benchmark for vehicle lifts.
Low-pressure HVLP direct-drive cylinders do away with the lifting chains and screw-drive systems that wear out and need regular service. Their inverted design keeps piston rods shielded from dirt and debris, which extends the life of the hydraulics and cuts down on maintenance. Each column carries its own self-contained electric-hydraulic power unit, so there are fewer shared parts to fail and any single column is simple to service. BendPak also finishes every column in durable powder coat that holds up to the knocks and grime of daily shop use.
A mobile column lift (also known as a portable column lift) is a set of free-standing columns that surround a vehicle and raise it evenly off the ground. Each column rolls into position on its own wheels, so there is no permanent installation and no fixed footprint the way there is with a two-post lift or four-post lift. This makes column lifts the standard choice for heavy-duty trucks, buses, and fleet vehicles that are too large or too heavy for a fixed lift.
The number of columns depends on how many axles the vehicle has, since each axle needs a column on both sides. A two-axle truck takes a set of 4, a three-axle vehicle takes a set of 6, and a four-axle vehicle takes a set of 8. If you service a mix of vehicles, a larger set gives you the most flexibility, because you can split it into smaller groups and lift more than one truck at a time.
Wired column lifts connect to each other with control cables that run between the columns, while wireless lifts communicate with no cables at all. Wireless systems leave the floor and the undercarriage completely clear, which gives technicians cleaner access and removes cables as a trip hazard. Wired systems work just as reliably and are often the more affordable option, so the right choice comes down to your budget and how much open floor space your shop needs.
We have product specialists with years of experience ready to answer your questions and help you through the buying process.
We're here Mon-Fri, 7am to 6:30pm CT
