6000ELX

6,000-lb. Capacity Portable Car Lift
In stock
SKU 5175650
$2,125.00
QuickJack’s 6000ELX is a super-long portable car lift with one of the widest lift point spreads in the industry. If you’re a driver of some electric car or have a vehicle with an exceptionally long wheelbase, then you’re going to want to be working with these frames. They’re perfect for detailing and wheel service on EVS. BACKORDER UNTIL MID-JULY 2023

Essential Accessories

  1. QuickJack-6000ELX-6,000-lb-capacity-portable-car-lift-electric-vehicle
  2. +
  3. Ranger RST 1WS Rolling Work Seat 5150514
  4. +
  5. QuickJack Wall Hanger Set 5210199
  6. +
  7. LITESTIX™ LS36MDX
Total price: $0.00

Overview

Why make the BL-6000ELX portable car lift system?

The ELX has the distinction of being QuickJack’s only car lift series to feature a single model. Its sporting super-long frames, frames that are even longer than their TLX series. This frame length is great for extremely long wheelbases, so this model will fit essentially all contemporary EV cars, and that includes top-end, luxury electric vehicles with lift points that run to the extreme edges of the vehicle frame.

QuickJack’s cantilevered frames feature an intuitive design which will ensure that they won’t rub up against your vehicle’s tires as they rise. Since every QuickJack is a premium lift, you’ll still get the same open-center car lift design and top-notch portability of their TL and TLX models. And it goes without saying, but this also comes with automatic safety locks.

The TL car lift series is capable of meeting 90% of consumer needs. The TLX series covers most other vehicles. That leaves 1-2% of long-wheelbase cars that are not covered by QuickJack. If QuickJack wanted to, they could probably leave it at that since it’s a small amount. Fortunately, they believe that everyone should have the ability to work on their cars, professionally or otherwise. They understand that the future is here, and that means that more and more EVs will need ways to get serviced. As the market stands today, there are not many options for raising some of these vehicles without a full-size four-post. The 6000ELX is one of the few car lifts out there, including scissor lifts and pit lifts, which has a point spread that’s long enough to get the job done.

XLT Car Lift Design

The 6000ELX portable car lift is a full 17” longer than the TL model, and it’s about 10” longer than the TLX model. Although the frames are longer and slightly heavier than some other QuickJack models, they’re still easy to roll around a garage or shop, thanks to the durable urethane construction of the wheels.

Automatic Safety Locks

The 6000ELX has a 6,000 lb. lifting capacity and features the same automatic mechanical locks as QuickJack’s TL and TLX models. Your QuickJack will be safe to lift anything (under the weight limit) that reaches the lift points.

Extended Lift Point Spread

With a lift point range of 47.5”-76”, there isn’t a lot of vehicles out there that this lift can’t handle. Its minimum ranges will cover most sports cars, sedans, light duty trucks, and more. Its maximum ranges make it one of the few car lifts which can lift vehicles with the longest wheelbases on the consumer market.

One-touch Button Control

The single touch of a button is all it takes to lift the electric-hydraulic frames, getting your vehicle over 21” in the air in about 30 seconds. One more push will safely lower vehicles onto the mechanical locks. You’ll be able to leave your vehicle in the air for minutes, hours, days, weeks, really as long as it takes to get the job done.

Built-in Hydraulic Flow Divider

The flow divider is built right into the power unit, and it’ll ensure that the frames lift evenly at all times. This is a necessary feature because there is no crossbar(s) there to act as a “brace” or mechanical leveler. Since the freedom of their open-center design is one of QuickJack’s most attractive features, the promise of a level rise and descent is most likely the most important one they can make.

TL minimum lift point spread: 29.5"
TLX minimum lift point spread: 35.5"
ELX minimum lift point spread: 53"

TL maximum lift point spread: 60"
TLX maximum lift point spread: 66"
ELX maximum lift point spread: 76"

TL overall frame length: 69"
TLX overall frame length: 76"
ELX overall frame length: 86"

Features

  • Automatic safety locks
  • Extended Lift Point Spread
  • One-touch Button Control
  • Built-in Hydraulic Flow Divider

Specs

Lifting Capacity

Capacity 6,000 lbs. (2,722 kg)

Lowered Height

A - Frame only: 3.5" (89 mm)
B - With 2" block: 4" (102 mm)

Lifting Height

D - With 2" block: 21.5" (546 mm)
E - With 3" block: 22.5" (572 mm)
F - Max. height: 24.5" (622 mm)
G - With adapters: 24.25" (610 mm)
H - With adapters + pin: 27" (686 mm)

Lift Point Spread

I - Maximum: 76" (1,930 mm)
J - Minimum: 53" (1,346 mm)

Frame dimensions (ea.)

K - Width: 12.5" (318 mm)
L - Length: 86.75" (2,203 mm)
A - Height: 3.5" (89 mm)
Weight: 112 lbs. (51 kg)

Other Spec

Time to full rise: 30 seconds
Power unit weight: 30 lbs. (13 kg)
Shipping weight: 318 lbs. (144 kg)

WARNING: California's Proposition 65