WARNING: California's Proposition 65
R76ATR + DST30P + Weights
(1) R76ATR + (1) DST30P + (1) Tape Weight Rolls (Black & Silver 1,400 pc.)
In stock
SKU 5140124
$8,995.00
Optimize your shop with this high-quality package from Ranger. With it you’ll be able to service wheels more efficiently than ever before. Included in this package deal is the R76ATR tire changer, the DST30P wheel balancer, and Quick-Peel™ adhesive steel wheel weights.
Overview
R76ATR
The R76ATR features easy-to-use, adjustable RimGuard™ clamps, and a tilt-back which will save significant time when loading a new set of wheels. The assist tower will help change low-profile and run-flats (anything with a stiff sidewall), and it will hold the bead in the drop-center, protecting the tire.
The R76ATR comes sporting a high-torque electric turntable drive which features increased speed and reversible direction for quicker tire removal and installation. The controlled speed gives low profile and run-flat beads time to relax. This ultimately reduces the risk of accidentally damaging a tire.
This tire changer comes with sturdy, adjustable RimGuard™ wheel clamps which are made from hardened steel and can accommodate wheels from 9” up to 30” and feature internal and external multi-teeth jaws with vertical mounting bolts that make replacement fast and simple.
The versatile clamp positioning allows for improved control when you’re clamping wheels. All you need to do is position the clamps precisely where you need them within the entire clamping range.
A geometric tabletop makes bead lubrication easy. Operators will be able to visibly inspect the lower bead during tire mounting and inflation. The R76ATR is sporting a completely new and proprietary bead-breaker design which features bilateral pneumatic accelerators for super-fast bead-breaker speeds in both directions. A 100% stainless steel cylinder body means no more worrying about moisture contamination from corrosion. This tire changer also features a multi-axis, adjustable blade for multi-angle tire capacity, and a large, dual flange axle which will virtually eliminate blade flex and premature failure. The adjustable blade settings also help accommodate a larger variety of tire and wheel combinations.
DST30P
The DST30P is capable of accurately and efficiently calibrating wheel and tire configurations. This wheel balancer can handle wheels up to 30” in diameter. The Direct-Axis drive system helps keep the DST30P running smoothly over time. It features a single belt which connects the motor and unbalance sensor, thereby eliminating most maintenance costs during your wheel balancer’s many years of service.
The Direct-Axis drive system helps ensure that the DST30P keeps running smoothly over time. A single belt connects the motor and unbalance sensor, which eliminates most maintenance costs during your wheel balancer’s many years of service.
The DST30P doubles the potential placement for wheel weights while still maintaining a space-conscious and cost-effective shop solution. It features dynamic, static, and ALU balancing modes which come standard on each unit. It also boasts dual plane calibration for all OEM configurations and performance wheels.
Ranger’s proprietary Digital Sensor Technology features a 16-digit digital sensor processor and single-chip technology which results in increased speed and accuracy in your readings. OEM and performance wheels require this sort of intuitive technology for proper balancing in your readings, so make sure that any wheel balancer you choose is fully capable of servicing these specialized wheel types.
Single-chip circuit board architecture upgrades performance and reliability over multi-chip installations, (e.g., latency reductions, substantial boost in device throughout). A quick, dedicated hyper transport protocol allows data to communicate with the micro-processor much faster than it would otherwise be possible. The single-chip boards also use less power and can better dissipate heat.
Tape Wheel Weights / Combo
Ranger’s stick-on-steel weights offer an incredible fit, as well as a reliable and cost-effective choice. Their weights are designed to be corrosion resistant and have little impact on the environment. Show your customers that you’re working with quality by using an adhesive that is extra-sticky, lessening the chance of it becoming loose and falling off the wheel.
Features
R76ATR
- 4 Clamps (Internal / External)
- Dual Pneumatic Cylinders
- Adjustable Pneumatic Blade
- Tilt-Back Tower Design
- Vertical Shaft / Tool Head Positioning
- Inflation System
- Inflation Gauge & Integrated Air Dump Valve
- Inflation Pressure Regulator/Limiter
- Water Filter
- Oiler / Lubricator
- Air Regulator
- Bead Tool/Tire Iron
- Alloy-Steel Mount-Demount Head
- Nylon Mount-Demount Head
- Large Soap Bucket
- Soap Brush
- TurboBlast™ Bead Seating System
- Tool Tray / Bin Storage
- Motorcycle Turntable Clamps (optional)
DST30P
- Dynamic, Static, and Performance Alloy settings
- A multi-user save function holds presets to increase productivity
- An ergonomic control board and easy-to-read LED display has vibrant visual cues and keypad to improve efficiency and proper balancing techniques for faster floor-to-floor times
- A simultaneous retrieval of static, dynamic and ALU1/ALU2 data, identifies weight placement configurations for a variety of wheel styles and designs with the simple push of a button
- Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors
- Low RPM balancing speed and rapid six-second cycle time
- Automatic braking
- Gram/ounce selection and millimeter/inch selection
- Automatic round-off with top-dead-center weight position indicator
- Manual or automatic start when hood is lowered
- Self-calibration function
- High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools
- Newly designed side shelf features an open-top design that accommodates Ranger Quick-Peel™ adhesive tape weight convenient bulk rolls
- Precision-machined, hardened-steel 36 mm shaft
- Quick-release hub nut for dramatically reduced set-up times
- Side-position brake hold wheels at precisely 12-o’clock for proper weight placement
- Side cone storage pegs keeps accessories readily available
- New “open-side” hood design allows for a broader coverage of tire shapes and sizes
Tape weight rolls
- Silver powder-coated surface helps eliminate corrosion and staining of expensive wheels
- Strong adhesive backing for dependable attachment
- Quick-Peel™ liner for trouble-free use
- Lead-free, steel construction has less impact on the environment
- Meets national environmental laws and health and safety codes
- Designed to have same fit, function & look as OEM weights
- Narrow profile contours easier to OEM wheel shapes
- Slender profile and out-of-sight mounting capability enhance the looks of any wheel
- Low-profile design for increased clearance of close-proximity calipers or brake components
- Self-dispensing carton features Free-Glide™ center hub and nylon feeder for smooth, jam-free delivery
- Reduces inventory cost by eliminating traditional wheel weight inventories and requiring less floor space
Specs
R76ATR
Style
Style | Tilt-Back Tower Design |
---|
Assist
Assist Type | Single-Tower Assist |
---|
Speed
Speed | Standard |
---|---|
Motor | 3 HP (220 VAC 50-60 HZ) |
Drive System Type | Electric / Hydraulic |
Air Requirement | 110-175 PSI (8-12 BAR) |
Wheel Clamping Method | 4 Clamps - Internal / External |
Table Clamping System | Dual Pneumatic Cylinders |
Bead Breaking System | Adjustable Pneumatic Blade |
Tower Design | Tilt-Back |
Power Assist Tower(s) | Single / Right-Side |
Bead Lifting Roller(s) | Single / Right-Side |
Upper Bead Assist Roller | Single / Right-Side |
Vertical Shaft / Tool Head | Pneumatic / Locking |
Powerful Bead Seating System | TurboBlast™ |
Internal Rim Clamping Capacity | 10” – 30” (254 mm - 762 mm) |
External Rim Clamping Capacity | 9” – 28” (229 mm - 711 mm) |
Turntable Tire Width Capacity (Mounting) | 4” – 18” (102 mm – 457 mm) |
Bead Breaker Tire Width Capacity (Demounting) | 1.5” – 16” (38 mm – 406 mm) |
Maximum Tire Diameter | 43” (1,092 mm) |
Shipping Weight | 908 lbs. (412 kg) |
Shipping Dimensions | 51'' x 45'' x 73'' (1,295 mm x 1,143 mm x 1,854 mm) |
DST30P
Style
Style | Auto & Light Truck |
---|
Data Entry
Data Entry | Manual |
---|---|
Motor | 1.5 HP, 220V, 50 / 60 Hz, 1Ph |
Working Temperature | -5°C / 27°F - 50°C / 82°F |
Cycle Time | 6 - 9 Seconds (avg.) |
Balancing Modes | Dynamic / Static / 3-Alloy |
Drive System | Belt Drive |
Wheel Braking | Automatic / Electronic |
Cones Included | 3 Standard / 1 Truck |
Max. Tire Diameter | 50”(1,270 mm) |
Max. Tire Weight | 150 lbs. (68 kg) |
Wheel Diameter Capacity | 8” - 30” (254 mm - 672 mm) |
Wheel Width Capacity | 1.2” - 20” (30 mm - 508 mm) |
Balancing Increments | 0.25 oz (7 gram) |
Balancing Speed | 180 RPM |
Accuracy | +/- 1 gram (.035 oz) |
Resolution | 0.01 ounce, 1.4° |
Shipping Weight | 370 lbs. (168 kg) |
Shipping Dimensions | 44" x 30" x 46" (1,117 mm x 762 mm x 1,168 mm) |
Tape Weight Rolls
Tape Width | 1/2" (13mm) |
---|